Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Dallas
A new driveway or entry gate in North Dallas typically runs $4,800 to $14,500 installed, depending on the gate style, operator, and whether your HOA requires architectural review before work begins. We coordinate that approval process for you, so the board signs off and the crew installs without a stop-work order halfway through. Call (469) 273-6254 and we’ll walk the site, photograph the existing entry, and hand you a written price before any tool touches the ground.
We work the gated communities along the Dallas North Tollway corridor every week: Bent Tree, Prestonwood, Stonebriar, Starwood, and the older estate pockets in Preston Hollow and Northwood Hills. Each one has its own architectural committee, its own finish spec, and its own soil problems. We know which gates in North Dallas will need a footing re-pour before the operator goes in, because we’ve already dug in that clay.
Why Vance Gate Repair Garland Is North Dallas’s Preferred Gate Installation Company
Most North Dallas HOA communities require written approval on gate style, height, finish, and operator placement before installation. We handle that paperwork with your management company, and we do it before we schedule the crew. The board gets a spec sheet with the exact dimensions, finish number, and operator model. You get the same sheet. No one is guessing.
The work itself comes with a documented record. Every installation leaves a photo log: footing depth before the pour, post plumb after the pour, limit-switch settings, photocell alignment, and the part number of every component installed. That’s The Haven Standard, and it means the next technician who touches your gate in five years doesn’t have to rediscover anything.
Adrian Vance started this company in 2014 doing commercial access-control documentation, and that habit carried into every residential gate we install in North Dallas. If a homeowner calls us in 2029 and says the gate drags, we pull the file and see the exact footing depth from 2025. That’s not a promise. It’s a record.
We have repaired and installed over 22,000 gates since 2014, every single one with a written price before the job started. A live person answers the phone at (469) 273-6254, 24 hours a day. Not a callback queue.
Our Gate Installation Services in North Dallas
Driveway Gate Installation
Driveway gates in North Dallas are usually ornamental iron or tubular steel set into brick or stone columns, and we fabricate and hang them to match your community’s existing entry aesthetic. In the 1985-2005 HOA communities along the Tollway, that often means matching a 20-year-old finish so the new gate doesn’t stand out from the original streetscape. We measure, weld, powder-coat or paint to spec, and set the operator to pass a UL 325 entrapment test before we leave.
Pedestrian Gate Installation
A pedestrian gate for a North Dallas side yard or pool enclosure usually runs $1,800 to $4,200, including a magnetic lock or keypad entry. These are smaller, but the HOA finish requirements still apply, especially on street-facing pedestrian entries. We install these with the same photo documentation and written record as a full driveway gate.
Sliding Gate Installation
Sliding gates are the standard for North Dallas gated communities with limited setback space, and we install them with cantilever rollers or a V-track system depending on the grade. The Blackland Prairie clay under North Dallas shifts constantly, so we don’t set slide-gate rollers on shallow concrete pads. We pour deep, drained footings and set the rack and pinion to spec. Most sliding gate installations in North Dallas run $5,500 to $12,000 with the operator included.
Swing Gate Installation
Swing gates dominate the older Preston Hollow and Northwood Hills estates, and those installations demand a post-plumb assessment before anything else. We have pulled brick columns in North Dallas that were racked 3 degrees out from decades of clay heave. If we skip that check, the new gate binds within one wet season. Swing gate installations on new steel posts with a fresh operator typically run $4,800 to $10,500 in North Dallas, more if we’re re-pouring columns or matching custom ironwork.
Double Gate Installation
Double driveway gates are common on wider North Dallas entries, and they need matched operators or a master-slave board so both leaves open in sync. We install double swing and double slide gates throughout North Dallas, and we always photograph the sync settings so both leaves stay calibrated through seasonal clay movement.
Security Gate Installation
Security gates in North Dallas usually combine an ornamental iron gate with a keypad, phone-entry, or transponder reader for resident and guest access. We install the gate, the operator, the access hardware, and the safety photocells as one scoped project. For HOA entries in North Dallas, we also coordinate the resident credential programming with your management company so the gate is live the day the install finishes.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Dallas
We install and service operators from Viking, Linear, Ghost Controls, and DoorKing, among others, and we never steer a North Dallas customer toward replacing a motor just because it’s a brand we don’t stock. If the existing operator is a LiftMaster, FAAC, BFT, Elite, or Mighty Mule, we work on it. Our trucks carry the common boards, photocells, limit switches, and remotes these systems use, so a North Dallas install doesn’t stall waiting on a part shipment from Dallas or Fort Worth.
Common Gate Installation Problems We See in North Dallas Homes
North Dallas has two problems that show up on nearly every installation we quote. First, the HOA process. Second, the soil. Here’s what that looks like on the ground:
- Architectural approval delays: A homeowner orders a gate, the crew shows up, and the management company hasn’t signed off. We won’t let that happen. We submit the spec sheet and finish sample to your North Dallas HOA before the crew is scheduled, and we don’t cut metal until the approval is in writing.
- Clay heave after installation: The Blackland Prairie clay in North Dallas shrinks in summer drought and swells after fall rain. New gate posts set in shallow footings will shift within one wet season, throwing limit switches out of calibration and making the gate bind. Our footings go below the active clay zone, and we document the depth.
- Operator board burnout in summer heat: West-facing entries in North Dallas can hit 105°F-plus in July and August, and control boards fail faster than manufacturer ratings when they bake in that heat. We spec operators with proper ventilation and, where possible, shade the board housing.
- Mismatched ironwork on HOA entries: A gate that doesn’t match the community’s ornamental pattern gets flagged by the board and has to come down. We match the existing picket profile, spacing, and finish from the community’s original streetscape, not a catalog page.
Pricing for Gate Installation in North Dallas, TX
Here are the honest ranges for North Dallas, quoted before any work starts:
- Pedestrian gate with keypad: $1,800-$4,200
- Single swing driveway gate with operator: $4,800-$10,500
- Sliding driveway gate with operator: $5,500-$12,000
- Double swing or double slide gate with matched operators: $8,500-$14,500
- Custom ornamental iron matching to an existing HOA pattern: add $1,200-$3,200
What moves the number is the gate size, the operator brand, whether we’re re-pouring footings or working with existing columns, and how much custom ironwork your HOA pattern requires. We write the price down and hand it to you before the crew starts. That’s The Haven Standard, Clause 1. Call (469) 273-6254 for a free site walk in North Dallas and a written estimate.
We Also Serve Cities Near North Dallas
Our North Dallas crews regularly handle Gate Installation work in the surrounding metro: Garland, Rowlett, Richardson, and Murphy. If you’re in one of those cities and need a gate quoted, the same written-price rule applies. We serve all of North Dallas and the nearby suburbs from our Dallas-Fort Worth office, with crews dispatched locally.
Serving North Dallas, TX - Our Local Coverage Area
We’re based in the North Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Dallas
Yes, in almost every North Dallas HOA-governed community including Bent Tree, Prestonwood, and Stonebriar, the board or management company must sign off on gate style, height, finish, and operator placement before installation. We prepare the spec sheet and finish sample, submit it to your HOA, and wait for written approval before we schedule the crew. Skipping this step will stop your project mid-install. Call (469) 273-6254 and we’ll handle the approval paperwork for you.
The clay under North Dallas shrinks during summer drought and swells after fall rain, and this cycle gradually tilts gate posts and throws limit switches and drive chains out of calibration every season. New posts set in shallow footings will shift within one wet season, causing the gate to bind or drag. We pour footings below the active clay zone and document the depth with photos, so any future movement is measurable against the original install.
Yes. We match the existing picket profile, spacing, and finish from your community’s original streetscape, which for many 1985-2005 North Dallas HOAs means a specific iron pattern that a catalog gate won’t match. We fabricate to the board’s spec or match the existing gate in place, and we document the finish number in your job record. Bring us a photo or the architectural spec and we’ll quote the match.
For most North Dallas HOA communities, a phone-entry or transponder system tied to the management company’s resident database works best, because it lets residents buzz guests in from a cell phone without issuing physical remotes. We install the gate, operator, keypad, and safety photocells, then coordinate the resident credential programming with your management company so the gate is live the same day the install finishes. Call (469) 273-6254 to talk through your community’s specific access setup.
A typical North Dallas gate installation takes 2 to 6 weeks from quote to finished install. HOA architectural review usually accounts for 1 to 3 weeks depending on your board’s meeting schedule. The physical install takes 1 to 2 days for a single gate, plus any footing re-pour that the clay conditions require. We’ll give you a written timeline at the start, and we stick to it.
Written by Adrian Vance, Owner at Vance Gate Repair Garland, serving North Dallas since 2014.
Contact Vance Gate Repair Garland for Gate Installation in North Dallas
If you live in North Dallas and you’re ready for a gate that the HOA approves and the clay can’t wreck, call (469) 273-6254. We’ll walk the site, photograph the existing entry, and hand you a written price before anything gets installed. Free estimates, documented work, and a live person on the phone every time.
Gate Installation in Nearby Areas
