Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across Wylie
A new driveway gate in Wylie typically runs $2,800 to $9,500 installed, depending on whether you need a single swing gate, a slide gate, or a full HOA community entry system with keypads and battery backup. Most residential installations take one to two days once materials arrive and the concrete footing has cured. The critical factor here is not the gate itself. It is the soil underneath your post holes. Call (469) 273-6254 and we will walk you through what your specific Wylie street requires before you commit to anything.

Wylie sits on the Blackland Prairie’s deep expansive clay, which shrinks inches deep in summer drought and swells back with fall rains. That movement is the reason nearly every gate we install in Wylie gets a deeper, wider footing than the operator manual suggests. We are dispatcher-coordinated from the Dallas-Fort Worth office, and our crews work Wylie subdivisions every week.
Why Vance Gate Repair Garland Is Wylie’s Preferred Gate Installation Company
Our work in Wylie is not drive-by. We read the HOA design guidelines before we quote, because Wylie homeowners answer to architectural committees that can flag a gate for the wrong height, finish, or setback. Vance Gate Repair was founded by Adrian Vance in 2014 out of commercial access-control work, and that documentation habit travels to every residential gate we touch. Every Wylie job includes a written price before work starts and a photo record when we leave. That is Clause 1 and Clause 4 of The Haven Standard, our operating rules on every single project.
Our 365-Day Done Right Promise applies in full across Wylie: if the install is not right within a year, we make it right at no additional charge. You also receive a free second opinion on any written estimate from another company. Bring the paperwork and we will review it against our own numbers, no obligation. Trust here is built on what we can show you, not what we claim on the phone.
Our Gate Installation Services in Wylie

Driveway Gate Installation
Most Gate Installation work in Wylie happens on driveway gates serving 2000s-era brick and stone homes in subdivisions like Woodbridge and Bozman Farms. We set the post concrete the right way from day one, usually a 36-inch pier with rebar tied into undisturbed clay, because standard 18-inch footings drift out of plumb within two or three years on Wylie ground. The gate itself is the easy part. The footing is the future failure or the reason you never think about it again.

Swing Gate Installation
Swing gates dominate Wylie HOA communities, where ornamental iron and cedar privacy fencing define the streetscape. Wylie architectural committees often require a specific gate height, iron finish, and setback distance from the curb. We quote to that spec, not to what is cheapest, because an off-spec gate gets flagged and removed before the operator is even powered on.

Sliding Gate Installation
Sliding gates work well on Wylie lots with sloped driveways or short setbacks where a swing arc would cross the sidewalk. The hardware needs level ground and a roller track that can survive Blackland Prairie movement; we include leveling and drainage in the scope.

Security Gate Installation
For Wylie homeowners and HOA boards looking at community entry gates, security means more than a heavy panel. It means entrapment protection, photo-eye sensors, battery backup, and access programming planned before the first weld. We install the gate and the system together, and we leave documentation for whoever services it in ten years.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Wylie
Wylie’s housing stock landed in a compressed construction window between 2000 and 2015, and that means thousands of homes with similarly aged LiftMaster, Apollo, and Viking operators. We can put a new Linear operator on an HOA community entry or a Ghost Controls unit on a solar-powered driveway gate without steering you toward a motor you do not need. Adrian Vance and our crews have worked commercial access control since 2014, and we service Viking and DoorKing systems too. We stock common replacement parts for Wylie jobs, which means fewer week-long waits for boards and arms.
Common Gate Installation Problems We See in Wylie Homes

- Post heave from expansive clay. Blackland Prairie soil is among the most expansive in North America. A footing poured at 18 inches deep in June will move by September if the clay swells, and we see this in subdivisions across Wylie every season.
- HOA architectural committee rejections. Wylie’s master-planned communities enforce specific gate heights, finishes, and setbacks. Homeowners who install first and ask later can be fined or ordered to remove the gate.
- Shared entry gate lockouts. When one homeowner’s keypad or clicker gets programmed incorrectly, the whole community gate can fault and lock out the neighborhood. Our crews re-sequence access codes and document what changed.
- Ice event damage. North Texas freezes like Winter Storm Uri crack plastic drive gears and freeze limit switches, especially near Lake Lavon’s western shore where humidity also accelerates hinge weld rust.
Pricing for Gate Installation in Wylie, TX
A basic single swing driveway gate in Wylie runs $2,800 to $4,900 including the gate panel, posts, operator, and wiring. Add a keypad, a second operator, battery backup, or a larger security gate and the range moves to $5,500 to $9,500. A full HOA community entry gate with shared access and traffic-control loops typically starts around $9,000 and goes up from there depending on lane width and controls. Every price is written before work starts. No verbal estimate, no surprise invoice at the end. Call (469) 273-6254 for a free written estimate, and get our exact numbers on your specific gate.
We Also Serve Cities Near Wylie

Our crews cover Rowlett, Garland, Allen, and Rockwall with the same written-price standard. If your Gate Installation in Wylie project sits near a city line, we will confirm the service area and coordinate from our Dallas-Fort Worth office either way.
Serving Wylie, TX - Our Local Coverage Area
We’re based in the Wylie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Wylie

Yes, most Wylie master-planned communities require architectural committee approval before a driveway gate goes in, especially in subdivisions like Woodbridge and Bozman Farms. The committee typically reviews gate height, finish, setback, and whether the operator is solar or wired. Submit your design and placement plan before buying materials. Our team reads your HOA’s guidelines during quoting and builds the scope to the approval language.
Thirty-six inches is our standard in Wylie, with rebar tied into undisturbed clay and concrete poured past the post base. Standard 18-inch footings fail here because the expansive clay heaves and contracts with moisture. Near Lake Lavon’s western shore, where soil stays persistently moist, we may go deeper and add drainage to keep the pier stable through the wet season. Call (469) 273-6254 if you want our exact footing spec for your street.
A solar opener on a single-family driveway gate is common and works well in Wylie’s sunny climate. On shared HOA community entry gates, most boards prefer hardwired operators with battery backup because solar voltage dips on heavy-use days and cold snaps. If your HOA allows solar, we spec a panel and battery sized to the gate’s daily cycle count. Get the written recommendation from our team before you commit.
Heavy rain swells the Blackland Prairie clay beneath your gate posts, and that expansion pushes the post out of plumb. If the footing was shallow or unreinforced, the gate drifts with every wet cycle. The fix is a deeper concrete pier with rebar, not repeated hinge adjustments. In the Woodbridge subdivision, our crew reset a two-year-old ornamental iron swing gate that had drifted so far out of plumb the loop detector couldn’t hold the gate open. We excavated the hinge post, found the original footing only 18 inches deep, and poured a new 36-inch concrete pier with rebar tied into undisturbed clay before remounting the LiftMaster operator and recalibrating travel limits. The gate now cycles cleanly even after last fall’s rains.
Yes, automatic gates in Wylie must meet UL 325 entrapment protection standards, which most HOA architectural committees also explicitly require. That means photo-eye sensors, audible alarms or reverse on contact, and a manual release. We install entrapment protection on every automatic gate, and we photograph the settings before we leave. Call (469) 273-6254 for a free written estimate and we will include the compliance scope up front.
Written by Adrian Vance, Owner at Vance Gate Repair Garland, serving Wylie since 2014.





Before
After
Before
After