Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Parts & Welding for Garland Homeowners
When a gate hinge tears loose from a rusted post or a rail cracks at the weld, Garland homeowners need two things: a straight answer about what it costs and a repair that stays fixed. That’s what we provide at Gate Parts & Welding - Garland. Since 2014, Adrian Vance and our team have repaired over 22,000 gates across North Texas, every one with a written price before work starts and a photo record when the job is done. We don’t guess at the problem and we don’t hand you a surprise invoice. Call (469) 273-6254 and a live person answers, any hour, any day.
Welding and parts replacement isn’t a sideline for us. It’s the work we document the way commercial access-control jobs demand: what we found, what we set, what we installed, photographed and filed. If a hinge, roller, post, or latch on your gate has failed, we’ll name the part, name the price, and fix it right.
What Our Gate Parts & Welding Service Includes
Hinge Replacement
Gate hinges carry the full weight of the leaf every time it swings, and in Garland’s clay-heavy soil, posts shift and hinges bind until the metal fatigues. You’ll notice the gate dragging on the latch side or sitting visibly low at the free end. We cut out the worn hinge, weld in a new one matched to the gate’s weight and swing pattern, and photograph the finished weld before we leave.
Post Replacement
When a gate post rusts through at the base or leans far enough to throw the gate out of alignment, no hinge adjustment will hold. We remove the old post, set a new steel post in concrete to the correct depth for the gate’s size, and weld or bolt the hinges back in square. The written quote you get includes the concrete, the post, and the labor, so the price on the page is the price you pay.
Rail Repair
Gate frames crack most often at the rail joints, where vibration and weight concentrate stress. A cracked rail lets the gate flex, which pulls hinges and latches out of alignment in turn. We grind out the crack, reweld the joint, and add a reinforcing gusset where the design allows, then repaint the repair so it doesn’t become a rust point.
Custom Welding
Not every fix is a replacement part. When a bracket, mounting plate, or custom hardware piece fails, we fabricate the replacement in steel to match the original dimensions and attachment points. Our welds are done on-site where access allows, and every custom piece is documented with photographs and measurements in your job record.
Gate Rollers
Sliding gates ride on rollers that wear flat, seize, or chew into the track over time. You’ll hear grinding or see the gate shudder as it opens. We replace worn rollers with the correct size and load rating for your gate’s weight, clean and align the track, and verify the gate rolls without binding before we call the job complete.
Latch & Lock
A latch that won’t catch leaves your gate unsecured, and a lock that binds leaves you locked out of your own driveway. We replace mechanical latches, repair or replace gate locks, and align strikers so the latch engages cleanly every time. The work is photographed and the part numbers are recorded in the documentation we leave with you.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Parts & Welding
We work on whatever gate is already on your property. That includes Linear and Viking swing-gate systems common in Garland’s older subdivisions, where original hinges and brackets have seen decades of service. We stock replacement parts for these brands and know their bolt patterns and weight ratings well enough to order the right piece the first time.
For newer installations, we service Ghost Controls and DoorKing hardware equally. The parts we weld and replace on these systems are matched to the manufacturer’s specifications, not generic approximations. Whether you have one of these brands or any other make, the process is the same: we identify the failed part, quote the replacement in writing, and install it with documentation. See our Gate Parts & Welding in Rowlett page for the same service east of Garland, or check Gate Parts & Welding in Richardson if you’re on the west side.
BeforeAfterSigns You Need Gate Parts & Welding Right Now
- The gate sags visibly at the free end. This means a hinge or post has begun to fail. Ignored, the sag loads the remaining hinges and the latch until they fail too, and the repair doubles in scope.
- You hear grinding or scraping when the gate moves. Worn rollers or a dragging leaf are scraping metal against metal. The longer it runs, the more material wears away and the more parts need replacement.
- The gate shakes or flexes while opening. A cracked rail or loose weld joint is letting the frame move. Flexing concentrates stress at the crack and widens it with every cycle.
- Rust blooms at the base of a post or along a weld seam. Surface rust is cosmetic; rust at a weld or post base is structural. In Garland’s humidity and clay soil, a rusted post base can fail within a season.
- The latch won’t catch or the lock binds. A gate that doesn’t close securely is a security gap, and a binding lock will eventually break a key or seize entirely. Both are mechanical failures with a clear fix.
Our Gate Parts & Welding Process - Step by Step
- 1
You call and describe the problem. A live person answers at (469) 273-6254, any hour. We listen, ask about the gate type and symptoms, and schedule a visit at a time that works for you.
- 2
We inspect and document what we find. The technician arrives in a uniform, introduces himself, and examines the gate, the parts, and the failure. Every finding is photographed before any work is quoted.
- 3
You receive a written price. Under Clause 1 of The Haven Standard, the flat price for the repair is written and handed to you before anyone picks up a tool. No verbal estimate, no range that grows, no surprise at the end.
- 4
We do the work and photograph every step. The repair is performed on-site where possible. We photograph what was removed, what was installed, and the final alignment and welds, so you can see exactly what changed.
- 5
You get the documentation. Before we leave, you receive a written record of the part numbers installed, the adjustments made, and the photo log of the entire job. That record is also filed in our system, so any future service starts from documented history rather than guesswork.
How Much Does Gate Parts & Welding Cost in Garland?
How much Gate Parts & Welding costs in Garland varies by the part, the gate’s weight, and how much of the surrounding structure has failed. Here are the ranges we see most often across Garland, Mesquite, and Wylie:
- Hinge replacement: $180-$340 per hinge, depending on gate weight and whether the post is sound.
- Post replacement: $450-$850 per post, including concrete and labor.
- Rail repair with welding: $220-$500, depending on crack length and whether reinforcement is needed.
- Custom welding fabrication: $150-$400 for most brackets and mounting plates.
- Gate roller replacement: $150-$300 per roller set, including track alignment.
- Latch or lock replacement: $120-$280, depending on hardware type.
What drives the price is the gate’s weight, the condition of the surrounding structure, and whether the failed part is still available as an OEM component or needs fabrication. The way to avoid overpaying is to get the price in writing before work starts, which is what we do on every job. Our free estimate includes the inspection, the written price, and the photo documentation of what we found, whether or not you hire us.
Gate Parts & Welding Near Garland - Our Service Area
We serve Garland and the surrounding cities including Murphy, Sunnyvale, Rowlett, Richardson, Mesquite, Wylie, Heath, Rockwall, Plano, and North Dallas. Most parts and welding jobs in Garland are scheduled within one to two business days, and emergency repairs are dispatched as soon as a technician is available. If you’re checking providers across the metroplex, our home page covers the full scope of gate services we offer. For parts and welding specifically in your city, the Gate Parts & Welding in Garland service page has the details.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Parts & Welding in Garland
Gate parts and welding covers the repair or replacement of the structural and mechanical components of a gate: hinges, posts, rails, rollers, latches, and locks, along with any custom metal fabrication those repairs require. We weld cracked frames, replace failed hardware, and fabricate brackets in steel. Every job is priced in writing before work begins, and every repair is documented with photographs.
Most hinge, roller, latch, and rail repairs are completed in a single two-to-four-hour visit. Post replacement takes longer because the concrete must set, usually adding a day before the gate is fully functional. We’ll tell you the expected timeline up front, in writing, before any work starts. Call (469) 273-6254 for a specific answer on your gate.
Most parts and welding jobs in Garland and Gate Parts & Welding - Rowlett run between $180 and $850, depending on the part, the gate’s weight, and whether post work or custom fabrication is involved. You receive a written flat price before any work starts, so the number on the quote is the number on the invoice. Our estimates are free, and the quote is yours to keep either way. Call (469) 273-6254 to schedule an inspection.
Yes. We service all four brands regularly across Garland and the surrounding cities, and we stock or can quickly source their replacement parts. The parts we install are matched to the manufacturer’s specifications for your gate, not generic substitutes. If your gate uses a different brand, we can almost certainly service it too.
Yes. A live person answers the phone at (469) 273-6254 24 hours a day, seven days a week. If a gate is stuck open, won’t close, or has a failed post or hinge that’s compromised security, we’ll dispatch a technician as soon as one is available with a written price agreed before work begins.
Every repair we complete is covered by our 365-Day Done Right Promise. If the repair isn’t right within one full year, we make it right at no additional charge. No argument, no fee, no expiration within that window. The warranty and the photo documentation of your repair are both part of the job record we leave with you. Call (469) 273-6254 with any questions.
Clear the area around the gate so the technician can work safely, and make sure the gate’s power is accessible if it’s automated. If you have a written estimate from another company, bring it; we’ll review it at no cost as a free second opinion. You don’t need to have any parts on hand, we’ll bring everything required for the repair.
Schedule Your Gate Parts & Welding Service in Garland Today
If your gate is sagging, grinding, or won’t latch, call (469) 273-6254 now. A live person answers, any hour, and we’ll schedule a visit with a written price before any work starts. The estimate is free, the photo documentation is included, and the repair is covered by our 365-Day Done Right Promise. You’ll know exactly what’s wrong and exactly what it costs, before we touch a tool.
Written by Adrian Vance, Owner at Vance Gate Repair Garland, serving Garland and North Texas since 2014.