Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Irving
Gate repair in Irving usually comes down to one of three problems: a motor that quit, a post that shifted in the clay, or a gate that never worked right from the day the builder installed it. Most Irving Gate Motor & Opener jobs we handle are diagnosed and fixed in a single visit, with the price written down and handed to you before any tool comes off the truck. We serve every corner of Irving, from the HOA communities off MacArthur Boulevard to the older ranch-style tracts in south Irving, with same-day dispatch for a gate that won’t open or won’t close. Call (469) 273-6254 and a live person answers, day or night.
Why Vance Gate Repair Garland Is Irving’s Preferred Gate Repair Company
Irving is not a one-size-fits-all gate market. It’s two markets stacked on top of each other, and we work both of them. In Las Colinas we service commercial-grade entrance systems on corporate campuses, the same kind of access-control hardware Adrian Vance cut his teeth on starting in 2014. Then we drive ten minutes and repair a 1996 Linear swing-gate operator on a Valley Ranch HOA entry that’s been failing since the last big rain shifted the post. Most gate companies in the Metroplex can do one or the other. We do both, and we price both the same way: written quote before work starts, photo record when we leave.
Our Gate Repair team dispatches to Irving six days a week with trucks stocked for the motors this city actually runs, including Linear, Viking, Ghost Controls, and DoorKing. When you call, you get a live person on the phone, not a voicemail loop. When the technician arrives, you already know their name and what they look like. That’s how we run every job in Irving, and it’s why HOA managers and homeowners both tend to call us the second time instead of shopping around again.
Our Gate Repair Services in Irving
Automatic Gate Repair
Automatic gate repair in Irving splits into two very different jobs depending on where you live. In Valley Ranch, we’re usually replacing a control board on a 1990s-era linear arm operator or a stripped rack on a sliding HOA gate. In Las Colinas, we’re more often diagnosing a loop detector that won’t hold, a photo-eye that’s drifted out of alignment, or a limit switch that’s been baking in the west-facing sun too long. Either way, the fix starts with the diagnostic, not the sales pitch. We tell you what’s broken, what it costs to fix, and what it costs to replace, and the choice stays yours.
Hinge & Post Repair
Irving sits on Blackland Prairie clay, and that clay is the single most common reason swing gates here pull out of square. The soil swells after spring rain and shrinks in summer drought. The post heaves. The hinge binds. The motor strains and eventually throws an error code or strips a gear. We do hinge and post repair in Irving the way the soil demands: we reset the post in concrete that can take the seasonal movement, we replace worn hinge bushings, and we photograph the final position so you have a record if anything shifts again. In older south Irving neighborhoods with masonry walls and narrow driveways, we work around what’s already there. We don’t ask you to rebuild the entrance to fit a new gate.
Gate Realignment
Realignment is the repair Irving homeowners often don’t know they need until the motor burns out. A gate that drags, scrapes, or needs a push to get started is telling you something. In Valley Ranch, where dozens of swing gates were installed by the same handful of developers between 1988 and 1998, the alignment issue is often a matter of original weld fatigue on the gate frame itself. In newer Las Colinas communities, we see alignment problems from gates installed on compact lots where the hinge post was set too close to the driveway edge. We realign, reinforce, and document the correction.
Electric Gate Repair
Electric gate repair in Irving covers everything from a dead keypad to a full operator swap. The most common call we get in August is a board that overheated inside a black control box mounted on a south-facing wall. The most common call we get in May is a photo-eye knocked out of position by a rainstorm and a gate that refuses to close as a result. We carry replacement boards, capacitors, limit switches, remote receivers, and safety edges for the nine major automation brands, so most electric repairs in Irving are completed on the first visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Irving
We work on whatever motor is already on your property. Irving’s housing stock spans four decades of gate technology, so we routinely service Linear operators from the Valley Ranch buildout era, Viking commercial units on Las Colinas campuses, Ghost Controls openers on newer residential installs, and DoorKing systems on both sides of the city. We don’t steer you toward a brand-new motor when a control board or a capacitor will fix the problem. We stock parts for the brands Irving actually runs, which means faster turnaround and fewer second visits.
Common Gate Repair Problems We See in Irving Homes
- Clay-soil post shift. Blackland Prairie clay is expansive. When it rains, it swells and pushes gate posts out of plumb; when it dries, it contracts and leaves the post leaning. This seasonal cycle is the number-one cause of swing-gate binding in Irving, and it’s worse in older south Irving tracts where posts were set before modern concrete techniques were standard.
- Builder-grade operator failure in Valley Ranch. Hundreds of HOA entry gates in Valley Ranch went in during the 1988-1998 buildout, many with Linear and Early Apollo operators that are now well past their intended service life. When one fails, the rest of the neighborhood’s gates usually follow within a year or two. We stock parts for exactly these units, which is why our trucks carry what other companies have to order.
- August circuit-board burnout. Irving summers hit triple digits for weeks at a stretch, and any operator with a west- or south-facing control box is baking in it. Capacitors swell, solder joints crack, boards fail. It’s the single most predictable failure pattern we see in Irving, and it’s almost always repairable without replacing the whole operator.
- Loop-detector and photo-eye drift on Las Colinas campus gates. Commercial entrance gates see hundreds of cycles a day, and the underground loop detectors that tell the gate a car is waiting fail more often in Irving’s heat than in cooler climates. Photo-eyes also drift out of alignment from daily vibration. Regular adjustment and testing catches these before the gate locks a tenant out at 7 a.m.
Pricing for Gate Repair in Irving, TX
Most gate repairs in Irving run between $180 and $550. A hinge and post reset on a standard residential swing gate typically lands at $320-$480, depending on whether the post needs to be pulled and re-set or just shimmed and re-bolted. Gate realignment runs $140-$260, less if we’re already on site for another repair. Automatic gate operator repairs cost $200-$600 for board swaps, limit switch replacements, and photo-eye realignment; full operator replacements run $1,400-$3,800 depending on the brand and whether it’s a swing or slide gate. These are the numbers we quote in Irving, and the quote you get is the price you pay. Written down, before work starts. Every job here is covered by our 365-Day Done Right Promise, which means if the repair isn’t right, we come back and make it right at no charge. Call (469) 273-6254 for a free estimate on anything you’re dealing with, and we’ll put the number in writing.
We Also Serve Cities Near Irving
Our Gate Repair coverage includes Dallas, Mesquite, Sunnyvale, and Richardson, and our dispatch is coordinated from the Dallas-Fort Worth metro office so a crew can be in Irving quickly when a gate goes down. If you’re in a neighboring city and your HOA gate has quit, call (469) 273-6254 and we’ll route the nearest technician.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Irving
Because most of them were installed during the same 1988-1998 buildout window by a handful of developers using the same operator models, typically Linear and Early Apollo units. Those operators are now 25-40 years old, which is well past their designed service life. When one fails, its neighbors aren’t far behind. We keep the common parts for that era in stock, which means a failed HOA gate in Valley Ranch can often be repaired the same day instead of waiting for a backordered part. Call (469) 273-6254 if your HOA’s gate is down.
Irving sits on Blackland Prairie clay, which expands when wet and contracts when dry. Spring rains push the soil up and can heave a gate post out of plumb; summer drought shrinks the soil and leaves the post leaning outward. A post that’s moved even half an inch binds the hinges, makes the gate scrape, and forces the motor to work harder, which shortens its life. We address this by setting posts in concrete that tolerates the seasonal movement and by documenting the final position photographically so any future shift is easy to spot.
Yes. Central and south Irving’s older ranch-style homes often have masonry walls and narrow driveways that were built before automatic gates were common, and adding automation there requires working around the existing layout rather than rebuilding the entrance. We handle that regularly: mounting on existing masonry posts, running the power and conduit where none was ever installed, and adding the required safety photocells. The final price includes the excavation, the electrical run, and the operator, written down before you approve anything. Call (469) 273-6254 for a free measure and written estimate.
Any automatic gate in Irving is subject to UL 325 safety requirements, which include photoelectric sensors, safety edges, or both, depending on the gate type and operator. Slide gates need a minimum of two entrapment-protection devices; swing gates require protection at the hinge and latch areas. We install and verify these on every automation job, and we photograph the final configuration so the record is on hand if your HOA or insurance company asks for documentation. This is standard on every job, not an upsell.
Because the control box is cooking. Irving’s August heat pushes temperatures past 100 degrees for weeks, and any operator with a south- or west-facing control box is absorbing that heat all afternoon. Capacitors swell, circuit boards warp, and the failure happens right when you need the gate most. It’s the most predictable failure we see in Irving, and the fix is usually a replacement board or capacitor rather than a full operator. Call (469) 273-6254 if your gate dies in the heat, and we’ll get it diagnosed.
Call Vance Gate Repair Garland for Gate Repair in Irving, TX
If your gate is stuck, sagging, or dead, call (469) 273-6254. A live person answers, day or night. We’ll tell you what we think it is, what it costs to fix, and when we can be there. The price is written before work starts. You get a photo record of everything we found and everything we did. And if it’s not right, we come back within a year and make it right at no charge. That’s how we’ve run every gate repair in Irving since Adrian Vance started the company in 2014, and it’s how we’ll run yours.
Written by Adrian Vance, Owner at Vance Gate Repair Garland, serving the Dallas-Fort Worth metro since 2014.