Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLock Repair in Garland, TX
Gate repair for residential and light commercial locks in Garland typically costs between $150 and $450, depending on whether the issue stems from a simple latch misalignment or a faulty electronic solenoid. We provide written pricing before we begin any work, ensuring you know exactly what you are paying for before our technician picks up a tool. If your gate is not latching properly, failing to engage the strike plate, or refusing to release when the keypad is triggered, call us at (469) 273-6254 to schedule a technician who can provide a documented assessment of the problem.
We operate under the Haven Standard, which means every visit includes a written scope of work and a photographic record of what we found, what we adjusted, and what we replaced. Whether you are dealing with a malfunctioning home gate system or a complex access control setup, our team at Vance Gate Repair Garland ensures that no future technician will have to guess what was done on your property. For broader mechanical issues, you can also view our primary services on our Gate Repair in Garland page.
When You Need Lock Repair
Gate locks in North Texas face unique stressors. We see many systems fail due to extreme temperature fluctuations that cause metal components to expand and contract, throwing off alignment. If you notice any of the following, your lock system likely requires professional attention:
- The gate fails to latch consistently: If the gate swings past the catch or bounces back, the internal latch mechanism or the strike plate is likely misaligned. In Garland, we often see this caused by ground shifting or heavy winds pushing the gate frame out of square.
- Electronic lock failure: If you use a mag lock or an electric strike, and the gate remains locked even when you provide the correct code, the solenoid or the relay board may be burned out.
- Binding or grinding sounds: If you hear a grinding noise when the gate attempts to lock or unlock, the internal gears of the lock actuator are likely stripped or the mechanism is clogged with debris.
- Keypad commands are ignored: Sometimes the issue is not the lock itself but the signal path. If the gate motor triggers but the lock does not release, the wiring between the control board and the lock may be compromised.
- Visible rust or corrosion: If the physical lock housing is corroded, it can impede the movement of the bolt, leading to a jammed gate that poses a security risk to your property.
Our Lock Repair Process
We do not guess at problems. We follow a strict, documented process for every service call. Adrian Vance developed this approach while working on commercial access control systems, and we apply that same rigor to every residential gate in Garland.
- Diagnostic Assessment: Upon arrival, our technician inspects the entire locking assembly. We test the voltage at the lock to determine if the issue is electrical (like a bad transformer or control board) or mechanical (like a bent strike plate or broken latch spring).
- Written Scope and Pricing: Under Clause 1 of the Haven Standard, we present you with a written, itemized price for the repair before we touch the gate. You will know exactly what the cost is, with no surprise invoices or hidden fees later.
- Component Testing: We check the specific brand components, such as your Linear or Viking lock actuators, to see if they are within manufacturer specifications. If a component is failing, we identify exactly why, rather than just suggesting a replacement.
- Implementation and Adjustment: We perform the repair, which may involve realigning the gate hinges, replacing a solenoid, or cleaning and lubricating the latch assembly. If we replace a part, we show you the old part and explain why it failed.
- Documentation and Verification: Following Clause 4 of the Haven Standard, we take photographs of the completed work. We leave you with a photo log of the repair, which serves as a record for your property files. This ensures that if you ever need service again, we know exactly what was installed and how it was set.
BeforeAfterLock Repair Pricing in Garland
We believe in upfront, transparent pricing. Because every gate and lock system is different, we provide a written estimate after we assess the situation on-site. However, to help you understand the market in Garland, here are the general price ranges for common lock repair services.
| Service Type | Estimated Price Range |
|---|---|
| Mechanical Latch Adjustment | $150 – $225 |
| Solenoid/Electric Strike Replacement | $250 – $450 |
| Mag Lock Troubleshooting & Repair | $200 – $375 |
| Wiring Repair/Signal Path Correction | $175 – $300 |
Please note that these ranges are estimates. If another company has provided you with a written estimate, bring that paperwork to us. We offer a free second opinion on any written quote from a competitor. Call (469) 273-6254 today to discuss your specific gate lock issue with a member of our team.
Safety and Professional Expertise
When dealing with gate locks, safety is the primary concern. Many gate locks, especially those on heavy-duty swing or slide gates, are located near high-tension springs or high-voltage control boxes. Attempting to force a gate open or tampering with a malfunctioning magnetic lock can lead to severe injury if the gate shifts unexpectedly or if you accidentally bridge an electrical circuit, which is why weld & rust repair and other structural issues should also be handled professionally. We strongly advise against DIY repairs on any gate system involving electrical components or high-tension hardware. Our technicians are background-checked and trained to handle these specific hazards, ensuring the repair is done safely and compliant with local Garland building standards.
FAQs - Lock Repair
How do I know if my gate lock is broken or if the motor is the problem?
You can usually tell by listening to the system. If the gate motor hums or attempts to move but the lock remains engaged, the issue is likely the lock or the signal path to the lock, and automatic gate repair expertise can help diagnose whether the problem is mechanical or electrical. If the gate does not move at all when you enter your code, the problem likely lies with the control board or the power supply rather than the lock itself. Call (469) 273-6254 and we can walk you through a simple test to narrow down the source of the failure.
Can you fix a DoorKing or Viking lock if you did not install it?
Yes, we service nine major automation brands, including DoorKing, Viking, Ghost Controls, and Linear, for any electric gate repair needs. We do not require that we installed the system to perform a repair. Our goal is to get your gate functioning properly again, regardless of who originally installed the hardware.
What is the 365-Day Done Right Promise?
Our 365-Day Done Right Promise means that if we complete a repair and it fails within one year, we will come back and make it right at no additional charge to you. We stand behind our documentation and our workmanship. If it is not right, we fix it, no arguments and no fees.
Can you come out to Garland today to fix my gate lock?
We answer our phones 24 hours a day, seven days a week, and we prioritize urgent security issues. When you call (469) 273-6254, we can check our current dispatch schedule and let you know exactly when a technician can be on-site. We do not use automated attendants or callback queues, so you will speak to a live person immediately.
Written by Adrian Vance, Owner at Vance Gate Repair Garland, serving Garland.