Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Frisco
A custom driveway gate installation in Frisco typically runs $4,800 to $14,500 for ornamental steel, with high-end Starwood or Phillips Creek Ranch properties reaching $22,000+ when you factor underground operators and matched access control. Most installations take two to four days on site once HOA approval is in hand. Call (469) 273-6254 and we’ll put a written price in front of you before anyone picks up a tool. That’s how we’ve done every gate job since Adrian Vance started the company in 2014, and we don’t see a reason to change it now.
Frisco is not a one-size-fits-all gate market. The soil moves, the HOAs rule, and the heat punishes cheap boards. We know that because we’re out here regularly, and our crews live with the same Collin County clay under their own driveways.
Why Vance Gate Repair Is the Gate Installation Company Frisco Homeowners Call
We’re Gate Installation specialists, not a fence company that also hangs gates. That distinction matters in Frisco because the gate has to hold its own weight against moving soil, not just look right from the street.
Frisco customers keep our schedule full because of how we document the work. Before any install, we walk the property, measure the posts, check the existing footing, and hand you a written scope with a written price. After the work, you get a photographed record of the post depth, the powder coat finish we matched, the operator settings, and the limit positions. No guessing. No invoice surprises. That’s The Haven Standard our founder built from commercial access-control work, applied to residential gates in Frisco.
Our techs are background-checked and uniformed. You get a name and photo before anyone arrives. And a live person answers our phone around the clock at (469) 273-6254. Not a queue. Not a callback.
Our Gate Installation Services in Frisco
Most Frisco properties fall into one of four gate categories, and we fabricate and install all of them. Here’s what that looks like in real terms.
Driveway Gate
Driveway gates in Frisco are the heavy lifters, literally. We build and hang custom ornamental steel driveway gates across Frisco’s master-planned communities, and we size every one to the post and the operator, not the other way around. On a double driveway gate in the Villages of Stonelake, that means two operators, a matched close sequence, and a safety photocell across the full opening. Most driveway gate installs in Frisco run $5,200 to $13,800 depending on width, automation, and finish.
Pedestrian Gate
Pedestrian gates for Frisco side yards and pool enclosures usually fall in the $1,200 to $3,400 range for fabricated steel with a magnetic latch and self-closing hinges. These gates get less attention than driveway gates, but they fail harder when the clay shifts because they’re often anchored to the house foundation on one side and a free-standing post on the other. We set pedestrian gate posts to grade and backfill with compacted base so they don’t pull away from the latch within a season.
Sliding Gate
Sliding gates make sense on Frisco lots with short driveways or steep slopes, but the track is unforgiving in clay soil. If the concrete pad under the track shifts even an inch, a sliding gate binds and the motor fights it. We pour reinforced track pads with deeper footings than most standard installs, and we set the V-track to grade. A motorized sliding gate installation in Frisco typically runs $6,000 to $15,000 installed.
Swing Gate
Swing gates are the most common gate we install in Frisco, and the most sensitive to black gumbo soil movement. A single swing gate in a community like Starwood runs $4,800 to $11,500, and a matched double swing gate runs more because both leaves need independent operators and safety edges. We re-plumb gate posts during install when the footing has drifted, and we photograph the post level before we hang the leaf. If the post rotates later, you have our 365-Day Done Right Promise on the work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterSecurity Gate
We install security gates for Frisco properties that need controlled entry, not just curb appeal. A perimeter security gate with access control, intercom, and camera integration starts around $8,500 and goes up from there based on operator type and the number of entry points. For HOAs at the community entry level, we handle loop detectors, keypads, and phone-based entry systems. If the existing operator is a DoorKing or a Linear, we can match it so you’re not ripping out working hardware to buy a new brand.
Trusted Brands We Service in Frisco
We stock parts for Linear, DoorKing, and Ghost Controls operators and can work on the other six major brands you’ll find around Frisco: LiftMaster, FAAC, BFT, Viking, Elite, and Mighty Mule. That matters when a board fails mid-install or an HOA requires a matching operator across multiple entries. We don’t steer you toward a brand we prefer. We work on what’s already there, and we order what we don’t have on the truck before we touch your gate.
Common Gate Installation Problems We See in Frisco Homes
- Black gumbo clay shifting new posts. Frisco’s expansive clay soil swells after rain and shrinks in drought. A post set too shallow or backfilled with loose soil will rotate out of plumb within a season, and the gate starts dragging on the latch side. We dig deeper, set the post below the frost line, and backfill with compacted base, not native clay.
- HOA finish rejections on custom gates. Frisco subdivisions with architectural review committees reject flat black finishes that don’t match the approved palette, or picket spacing that isn’t compliant. We pull the HOA guidelines before fabrication when you provide them, and we’ll match the powder coat to the subdivision standard before the gate is built.
- Operator board failure from heat cycles. 100°F+ summers stress gate operator control boards in Frisco, and cheap boards fail inside a decade. We specify operators with thermal protection and mount them with ventilation clearance. If the board fails anyway, our installs are covered under our 365-Day Done Right Promise.
- Post rotation after a wet spring and dry summer. We see this more in northwest Frisco neighborhoods like Starwood, where the clay is especially reactive. A swing gate post that rotated a few degrees after a recent dry spell needs re-plumbing before any operator work makes sense. We reset the footing and re-hang the gate rather than patching the symptom.
Pricing for Gate Installation in Frisco, TX
Here are real numbers for the Frisco market, based on work we’ve done in neighborhoods across the city:
| Gate Type | Typical Installed Price in Frisco |
|---|---|
| Pedestrian gate (fabricated steel) | $1,200 - $3,400 |
| Single driveway swing gate with operator | $4,800 - $11,500 |
| Double driveway swing gate with matched operators | $8,000 - $16,500 |
| Sliding driveway gate on reinforced track | $6,000 - $15,000 |
| Security gate with access control and camera integration | $8,500 - $22,000+ |
The price we write for your Frisco gate is the price you pay. It covers fabrication, post setting, operator, safety edges, powder coat finish, and the photo record we leave with you. Site-specific factors like HOA-compliant finish matching, underground operator requirements, or existing soil damage on the post line can shift the number, and we document those before we start. Estimates are free. Call (469) 273-6254 and we’ll schedule a walk.
We Also Serve Cities Near Frisco
Our gate installation crews work throughout and beyond Frisco, and we regularly install driveway, swing, and security gates in McKinney, Plano, Allen, and Carrollton. Scheduling runs out of our Dallas-Fort Worth office, and our techs dispatch to Frisco daily. If you’re just outside Frisco proper, call us and we’ll tell you frankly when we can get there.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Frisco
Frisco’s expansive clay, the black gumbo that runs under the city, swells and shrinks with Collin County’s rain-dry cycles, which can rotate a gate post out of plumb within a year if the footing isn’t deep and the backfill isn’t compacted. We set posts below the frost line and use compacted base instead of native soil. If you’re installing a gate on existing posts, we check plumb before we hang anything. Call (469) 273-6254 for a free site check in Frisco.
Yes, Phillips Creek Ranch and most other Frisco master-planned communities require architectural review committee approval before you install a custom gate, and they’ll reject finishes or picket spacing that don’t match the subdivision standard. We can fabricate to your HOA’s approved palette once you hand us the guidelines. If you have a written estimate from another company, we’ll review it at no cost and tell you if the specs are HOA-compliant.
Yes. We service all nine major gate automation brands, including the LiftMaster, Elite, and Linear operators most common in Starwood. If you’re replacing a gate but the operator is still serviceable, we’ll build the new gate around the existing motor and control board, saving you the cost of a new operator. If the operator needs replacement, we’ll quote the brand match before we start.
A properly fabricated steel swing gate with a powder coat finish and a well-set post should run 20 years or more in Frisco before the structure needs major work, though operator components and safety edges typically need attention every 5 to 10 years. The main threat to lifespan is the post, not the gate leaf. We set posts deep and document the plumb at install so future movement is easier to diagnose. Call (469) 273-6254 for an inspection if your gate is binding at the latch.
Yes, we install underground operators for double driveway gates in Frisco when the HOA or the homeowner wants a clean line with no visible operator arm. It’s more expensive than a surface-mount operator, and we’ll tell you that before you commit. Underground operators run cooler in Frisco’s summers, but they need correct drainage and a sealed vault to survive our clay soil, and we spec both. Call for a written estimate.
Frisco’s Gate Replacement Wave Is Here, and the Soil Is Part of the Job
Frisco’s master-planned communities from the 2000s and 2010s built hundreds of automated gates. Those gates are now 10 to 20 years old, which means the original operators are cycling toward failure and the original posts have lived through two decades of black gumbo movement. The HOA-governed entries in Phillips Creek Ranch, Starwood, and the Villages of Stonelake are hitting this replacement wave at roughly the same time, and each one has its own architectural review committee with its own approved finish list and hardware specs.
In Starwood, we installed a 14-foot custom ornamental swing gate with a LiftMaster operator on a home where the original hinge post had rotated several degrees out of plumb after a wet spring and dry summer. Our crew re-plumbed the post, reset the concrete footing, and re-hung the gate so it closes with a quiet operator, then matched the flat black powder coat to the HOA’s approved palette and integrated a keypad entry and safety photocell. That’s the job, every time: make it straight, make it quiet, make it match, document it.
If you’re in Frisco and your community gate or driveway gate is binding, dragging, or failing, call (469) 273-6254. We’ll give you a written price, a photo record when we leave, and a full year to hold us to the work.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Frisco since 2014.