Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across McKinney
Gate installation in McKinney runs $2,800-$7,400 for a standard residential swing gate with an operator, and $3,900-$9,800 for a sliding gate on a long driveway, depending on width, ironwork spec, and operator brand. Most installs we complete in McKinney take one to two days once materials are on site. If you’re in Stonebridge Ranch, Craig Ranch, or Trinity Falls and need a gate that matches HOA requirements exactly, call (469) 273-6254 and we’ll put the price in writing before any work starts.
McKinney’s master-planned communities are different from the rest of North Texas. The HOA architectural review process means a gate that looks close enough will get rejected. We know the spec sheets before we order a single picket.
Why Vance Gate Repair Garland Is McKinney’s Preferred Gate Installation Company
Since 2014, Adrian Vance and our crews have worked on more than 22,000 gates across North Texas, and McKinney jobs carry a specific profile: developer-specified ornamental iron, expansive clay soil, and HOAs that inspect picket spacing with a ruler. We don’t guess at compliance. Before we quote a McKinney gate installation, we document the existing ironwork profile, check the HOA’s current architectural guidelines where the homeowner has them, and write a price that covers matching the original spec.
Every McKinney installation gets a written scope and a written price before the first tool comes off the truck. That’s Clause 1 of our Haven Standard, and it’s non-negotiable. When the job is finished, you get a photo log of what was set, what was wired, and what was installed, with part numbers in the record. No future technician has to rediscover what we already documented.
Our response time to McKinney is same-day or next-day for installation estimates. A live person answers (469) 273-6254 at 3 p.m. or 3 a.m. No voicemail loop, no callback queue. You’ll know who’s coming before they arrive, because we send a name and photo of the uniformed technician on the dispatch.
Our Gate Installation Services in McKinney
We install every style of gate McKinney homes and acreage properties use. Here’s what we handle most often, and what it costs in this market.
Driveway Gate Installation
Most McKinney driveway gates are decorative swing or slide gates on large-lot single-family homes in subdivisions built from the late 1990s through the 2020s. A full driveway gate install in McKinney, with operator, safety edges, and two remotes, runs $3,200-$7,000 depending on width and material. We handle the power run, the operator, the safety photo-eyes, and the pad or post work.
Pedestrian Gate Installation
Pedestrian gates in McKinney usually serve side yards or HOA amenity areas. A matched pedestrian gate installed alongside a driveway gate runs $900-$2,100 including hinges, latch, and post. If the HOA requires the pedestrian gate to match the driveway ironwork profile, we spec it to the developer’s original dimensions.
Sliding Gate Installation
Sliding gates are the right answer for McKinney properties with steep or short driveways where a swing gate doesn’t have room to arc. A slide gate install with a rack-and-pinion operator starts around $4,200 and goes up from there based on gate weight and span. Heavy operators like LiftMaster’s industrial slide units are standard on the wide acreage entrances we see in the rural pockets east and north of McKinney proper.
Swing Gate Installation
Swing gates are the most common installation we do in McKinney, and they’re the most sensitive to what’s underneath them. Collin County’s expansive clay moves with the seasons, so we oversize the post footings and use deeper embedment than a standard suburban install calls for. A single swing gate with operator, installed correctly for our soil, starts at $2,800 in McKinney.
We also install Gate Installation of double gates, security gates with access control, and solar-powered operators for acreage where mains power isn’t practical.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in McKinney
You should not have to replace a working motor because a company only services one brand. We install and service Linear, Viking, Ghost Controls, and DoorKing operators, along with five other major automation lines. That means if you already have a gate motor on the property, we can usually work with it rather than steering you toward a full replacement. For McKinney customers we keep common control boards, safety edges, and receiver modules stocked, so a repair doesn’t stall for a week waiting on an out-of-state shipment.
Common Gate Installation Problems We See in McKinney Homes
- Posts shifting in expansive clay. McKinney sits on the heavy black clay that runs through Collin County. It heaves when wet and shrinks when dry, and a post footing that’s not deep or wide enough will lean within the first year. We set footings below the active movement zone and photograph the hole depth before concrete goes in.
- HOA architectural review rejection. A new gate panel that’s two inches off on picket spacing or uses a different finial style will get flagged by Stonebridge Ranch’s architectural review committee. We document the original spec before ordering, so the install passes the first time.
- Solar operators sized for the wrong gate. A solar panel and battery bank sized for a standard city driveway will not sustain a heavy slide gate on a wide acreage entrance through Cloudy January in McKinney. We size solar systems for the actual gate weight, cycle count, and winter sun exposure.
- Hydraulic operators killed by hard freezes. Winter Storm Uri in February 2021 destroyed outdoor control boards and hydraulic swing-gate operators that were built for Texas heat and never tested at sustained sub-freezing temperatures. We spec cold-rated electronics on McKinney installs and add battery backup where the power goes out with the freeze.
Pricing for Gate Installation in McKinney, TX
Here are the ranges we quote most often in McKinney, and they’re the same numbers we’ll hand you in writing before any work starts.
- Swing gate with operator: $2,800-$5,600
- Sliding gate with operator: $4,200-$9,800
- Double swing gate with operator: $5,400-$11,000
- Pedestrian gate (matching driveway iron): $900-$2,100
- Security gate with access control and keypad: $4,800-$10,500
- Post footing replacement or reinforcement (due to clay movement): $600-$1,800 per post
What moves the number within those ranges: gate width and weight, material (wrought iron versus tubular aluminum), operator brand, whether we’re pulling new power or tying into an existing run, and whether the HOA requires a specific powder-coat color or finial profile. The quote you get is the number you pay. We don’t hand over a written price and then add a surprise on the invoice. Call (469) 273-6254 for a free, written estimate.
We Also Serve Cities Near McKinney
We run installation crews to Allen, Plano, Wylie, and Frisco on the same schedule we run to McKinney. If you’re on the edge of any of those cities and your driveway straddles two municipal lines, that doesn’t change our dispatch. We schedule by your actual address, not by the city on the sign.
Serving McKinney, TX - Our Local Coverage Area
We’re based in the McKinney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in McKinney
Yes. Stonebridge Ranch’s architectural review committee enforces the developer’s original ornamental ironwork spec, including picket spacing, finial style, and powder-coat color, and a replacement that doesn’t match will be rejected. We document the existing profile before ordering so the install passes review the first time. Call (469) 273-6254 and we’ll walk your project against the current Stonebridge Ranch guidelines.
For McKinney’s black clay, a swing gate post should sit at least 36-42 inches deep with a footing diameter of 12-18 inches, depending on gate weight and leaf width. Anything shallower will start leaning within the first wet-dry cycle, and in some McKinney subdivisions we see posts move within the first calendar year when they were set in the standard 24-inch suburban hole. We photograph hole depth before pouring.
Yes, if the solar system is sized for the actual gate. A 16-foot tubular field gate with a heavy operator draws far more than a standard residential swing gate, and you need a panel and battery bank that can supply that draw through McKinney’s cloudy winter stretches. We calculate panel wattage and battery amp-hours for the gate’s measured weight and daily cycle count, not from a generic chart. Call (469) 273-6254 and we’ll spec it properly.
A properly installed LiftMaster slide operator with a sealed, cold-rated control board and a battery backup will handle a McKinney freeze, but a unit installed without weather protection and under-gauge wiring will fail when the temperature drops and stays there. After Uri in February 2021, we changed how we spec outdoor electronics on every McKinney install: sealed enclosures, heated pads where needed, and surge protection on the incoming power. Call (469) 273-6254 to have your existing setup inspected before the next hard freeze.
If you want the gate to stay open when a vehicle is sitting on the driveway, you need a loop detector, which is a wire loop embedded in the concrete or gravel that senses the metal mass of your car. A keypad alone will open the gate on a code but won’t prevent the gate from closing on a vehicle that’s partially through. For McKinney driveways with a slope or a curve before the gate, we recommend a loop plus a photo-eye safety edge. Call (469) 273-6254 and we’ll tell you exactly what your layout needs.
Get Your McKinney Gate Installation Quote in Writing
Before you spend a dollar on a gate in McKinney, know what the HOA will require, what the soil will do, and what the operator will draw. That’s the job. We’ll put all of it in writing, with a price, before anyone picks up a tool. Call (469) 273-6254 today for a free estimate, or to have Adrian Vance walk your existing gate and tell you what’s actually wrong with it.
Written by Adrian Vance, Owner at Vance Gate Repair Garland, serving McKinney gate installation customers with written pricing and documented work since 2014.
Gate Installation in Nearby Areas
