Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Irving
Gate installation in Irving runs $2,400-$9,800 for most residential jobs, depending on gate type, operator brand, and whether electrical and concrete work is already in place. That price includes the gate itself, the operator, mounting hardware, safety devices, and a written scope of work before anyone breaks ground. We serve all of Irving, from Valley Ranch to Las Colinas to the older ranch tracts south of Highway 183, and we typically schedule installations within five to ten business days. If you need a clearer number for your specific driveway, call (469) 273-6254 and we’ll walk the property with you.
Most Irving homes we visit share one thing: the gate was either installed manual and never automated, or it was built with a builder-grade operator that was never going to last past a decade or two. We fix both situations the same way. Concrete work, conduit, proper post footings, a motor that matches the gate’s weight and duty cycle, and safety sensors positioned to code. Then we photograph everything and hand you the record.
Why Vance Gate Repair Garland Is Irving’s Preferred Gate Installation Company
We’re the company Irving HOAs and homeowners call when a gate needs to work every single day, not just on the day it’s installed. Teams dispatch to Irving from our DFW metro office, and because we carry parts for nine major automation brands including Linear, Viking, and DoorKing, we rarely need to order anything special before starting. That matters in Valley Ranch specifically, where hundreds of subdivision gates run on operators installed between 1988 and 1998. We know those motors, we know their failure schedules, and we know what replaces them correctly.
Every installation we complete in Irving carries the same conditions: a written price before work begins, a photographed record of what we installed and how it was set, and a 365-Day Done Right Promise on the completed job. That’s the Haven Standard, and it applies whether we’re automating a single residential swing gate near Lake Carolyn or rebuilding a double gate at a community entrance off MacArthur Boulevard. The brand was built by Adrian Vance, who started in commercial access-control in 2014 and carried that documentation habit into residential work. You get the same wiring diagrams and limit-switch readings on your home gate that a Fortune 500 campus would expect.
We also review other companies’ written estimates at no cost. If you have a quote from another Irving gate installer, bring it. We’ll tell you what’s right, what’s missing, and what we’d charge for the same scope.
Our Gate Installation Services in Irving
Our Gate Installation team handles everything from a single pedestrian gate to a full security gate package at an HOA entrance. Here’s what that looks like in Irving specifically.
Driveway Gate Installation
Most Las Colinas driveways are wide enough for a standard double swing or a single slide configuration, but the masonry columns on older custom homes present a real challenge. We set new post footings below the clay line and use heavier posts than the original buildout typically called for. A driveway gate in Irving runs between $4,200 and $9,800 installed, with the spread driven by gate length, automation brand, and whether we need to core into existing stone or brick columns.
Pedestrian Gate Installation
Pedestrian gates in Irving rarely need the same operator duty cycle as driveway gates, but safety still matters. We install self-closing hinges, magnetic locks where access control is needed, and low-voltage power runs that don’t require trenching through established landscaping. Expect $1,800 to $4,200 depending on materials and whether you’re adding a lock, keypad, or intercom.
Sliding Gate Installation
Sliding gates make sense on Irving properties where the driveway slopes or where a swing gate would arc over a sidewalk. On Blackland Prairie clay, the track and roller carriage need a concrete pad that extends far enough to resist seasonal heave. That’s the difference between a slide gate that works for two years and one that works for twenty. Installed sliding gate systems in Irving typically run $3,800 to $8,500.
Swing Gate Installation
Swing gates are the most common installation we do in Irving, and the most common one we get called to correct. Builder-grade operators from the Valley Ranch buildout era simply weren’t sized for double gates with solid steel panels. We oversize the operator, set hinge posts with deep concrete collars, and factor in the gate’s full weight with wind load. A single swing gate installation in Irving runs $2,600 to $6,800, and doubles run higher depending on panel material.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Irving
We install and service nine automation brands, which means we don’t push you toward a replacement motor just because we only carry one line. In Irving, we frequently work with Linear on legacy Valley Ranch systems, Viking on heavier slide gates at HOA entrances, and DoorKing on commercial-grade security gates throughout Las Colinas. We also keep Ghost Controls on hand for residential retrofit work where a homeowner wants a straightforward, dependable opener without overbuilding the system. If your gate already has a motor from a brand you trust, we’ll work with it. If it doesn’t, we’ll match the operator to the gate’s weight, duty cycle, and exposure, and we’ll show you the spec sheet before we order anything.
Common Gate Installation Problems We See in Irving Homes
- Builder-grade operators failing on Valley Ranch subdivision gates. The original Linear and early Apollo units installed during the 1988-1998 buildout are hitting end-of-life simultaneously. One season a neighborhood sees two failures; the next season it’s seven.
- Clay soil heaving hinge posts out of alignment. Irving’s Blackland Prairie clay expands after spring rain and contracts in August. Posts that weren’t set with proper concrete collars below the movement zone tilt within the first year, and the operator strains against the bind until it burns out.
- West- and south-facing operators cooking in summer heat. Triple-digit heat on an unshaded Las Colinas wall degrades circuit boards and capacitors. We see this pattern every August, and the fix usually includes a shade cover or a relocation of the control board.
- Missing conduit and power runs on manual gates. When a home was built with a manual gate and never pre-wired for automation, the homeowner assumes it’s a big excavation. It’s often a clean directional bore or a shallow conduit run along an existing wall. We handle the electrical scope ourselves.
Pricing for Gate Installation in Irving, TX
Here’s what we quote, in writing, before any work starts:
| Gate Type | Typical Installed Price in Irving |
|---|---|
| Pedestrian gate, manual | $1,200-$2,800 |
| Pedestrian gate with automation and access control | $1,800-$4,200 |
| Single swing gate, automated | $2,600-$6,800 |
| Double swing gate, automated | $4,200-$9,800 |
| Sliding gate, automated | $3,800-$8,500 |
The biggest cost drivers in Irving are panel material and weight, whether new footings must be poured, and whether the home lacks an existing power source at the gate. We inspect the site, give you the written price, and you approve it before any work begins. No deposits we haven’t scoped, no change orders you didn’t sign. Call (469) 273-6254 for a free estimate on your specific gate.
We Also Serve Cities Near Irving
If you’re outside Irving and searching for Gate Installation in Irving or the surrounding area, we also serve Dallas, Mesquite, Sunnyvale, and Richardson. The same pricing standards, the same photo documentation, and the same 365-Day Done Right Promise apply everywhere we work.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Irving
Valley Ranch’s HOA gates were largely installed by a handful of developers between 1988 and 1998 using the same era of Linear and early Apollo operators. Those units were built to a twenty-year service life, and twenty-five to thirty-five years later, entire neighborhoods are seeing capacitor failures and limit-switch burnout in clusters. We stock parts for that generation of equipment, which means we can often replace a failed unit without ordering anything. If you’re on an HOA board and two or three of your entrance gates have failed in the same season, the fix is usually prevention on the remaining ones. Call (469) 273-6254 and we’ll assess all of them at once.
Irving’s Blackland Prairie clay expands after spring rains and shrinks in summer drought, which causes shallow-set gate posts to heave, tilt, and shift. For a new installation, the fix is simple and physical: dig the post footing deep enough to sit below the active movement zone, pour a wide concrete collar, and let it cure before hanging the gate. We do this on every Irving install, and we set posts deeper than what most track-home builders specified. If you’re getting quotes, ask each company how deep they set their post footings. If they can’t answer, that’s your answer.
Yes. Most central and south Irving homes from the 1960s and 1970s have masonry walls and narrow driveways that weren’t pre-wired for automation, but that doesn’t mean you’re stuck with a manual gate. We can run low-voltage conduit along an existing wall, directionally bore under a driveway where needed, and mount an operator that matches the gate’s actual weight rather than a box-store universal unit. Expect $2,400-$5,500 for a retrofit automation on an existing swing gate, including the operator, safety sensors, and power run. Call (469) 273-6254 and we’ll confirm the exact scope on your property before you commit to anything.
Irving follows Texas state code plus the UL 325 standard, which requires two independent entrapment protection devices on any automated gate: a photo-eye or infrared sensor across the gate’s path, and a reversing mechanism built into the operator itself, and on most installations a secondary device like a contact edge sensor. Any qualified installer should include this without being asked. We install photo-eyes, contact edges, and loop detectors on every automated gate, and we document the installation with photos after the fact. If you need a gate operator replaced and your current unit only has one safety device, that’s a red flag we’ll flag on the estimate, not after the invoice.
West- and south-facing walls in Las Colinas absorb direct sun all afternoon in August, and the surface temperature on the operator housing can exceed 150 degrees. The circuit board and capacitors inside degrade under that heat cycle, and the operator fails, usually in the same month you need it most. The fix is a shade cover, a relocating of the control board into a cool, ventilated position, and occasionally a heavier-duty operator rated for high ambient heat. We’ve corrected this exact failure mode on gate operators throughout the Las Colinas corridor. Call (469) 273-6254 for an assessment before the next heat wave.
Ready to Install a Gate That Actually Lasts in Irving?
We don’t sell gates off a one-page brochure. We come out, measure your driveway and gate path, check the slope, check the soil, check the power, and hand you a written price that includes everything: gate, operator, footings, conduit, safety devices, and a documented record of the work when we’re done. That’s what Irving homeowners and HOAs have expected from us since our first Valley Ranch job, and it’s what we’ll deliver on yours. Call (469) 273-6254 for a free, no-obligation estimate, or to schedule a site visit. A person answers, day or night.
Written by Adrian Vance, Owner at Vance Gate Repair Garland, serving Irving since 2014.