Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in McKinney, TX
Gate access control in McKinney usually means one of two things: a keypad or intercom at the driveway that stopped talking to the gate motor, or an HOA-mandated entry system at a subdivision entrance that needs to match the developer’s original spec. Most of the automated gates we work on across McKinney were installed between 2005 and 2015 inside master-planned communities like Stonebridge Ranch, Craig Ranch, and Trinity Falls. That means the access hardware is now hitting the same age-related failures at roughly the same time. If you need someone out today, call (469) 273-6254.
Why McKinney Homes Are Different
McKinney’s housing stock is unusually uniform for a city its size. Most single-family homes sit on large lots inside HOA-governed subdivisions built from the late 1990s through the 2020s, and the vast majority have decorative wrought-iron or tubular-aluminum driveway gates with electric operators. That uniformity creates a specific repair problem: when a panel rusts through or a post leans, you can’t just order whatever part fits. The replacement has to match the developer-original picket spacing, finial style, and powder-coat color, or the HOA architectural review committee can reject the work and force a redo.
The soil makes it worse. Collin County sits on heavy black expansive clay that heaves and contracts with every seasonal moisture swing. Gate posts shift. Gates rack out of plumb. A gate that opened smoothly in April can bind against the latch post by August. And the February 2021 freeze damaged a generation of hydraulic swing operators and outdoor control boards that were engineered for Texas heat, not five consecutive days below freezing. Technicians who work McKinney regularly know to look for freeze-related board damage and clay-driven post movement before they touch a single limit switch.
Our Main McKinney Services
Most McKinney homeowners reach out about one of these three jobs. Each has its own page on this site with full pricing and local detail.
Gate Repair in McKinney
Repair work in McKinney starts with diagnosing why the gate actually stopped: a seized hinge, a shifted post, a failed capacitor, or a control board that got wet. On HOA-governed properties, we photograph the existing ironwork profile and verify picket spacing before ordering anything, so the replacement matches what the architectural review committee approved. Gate Repair in McKinney covers all of it, including same-day emergency calls for gates stuck open or closed.
Gate Installation in McKinney
A new gate in McKinney is rarely a drop-in job. The post footings have to be sized for expansive clay, the operator has to be matched to the gate weight and cycle count, and the finished panel has to satisfy HOA design standards. We survey the site, write the scope, and quote the full number before any concrete gets poured, so there’s no surprise invoice after the fact. Gate Installation in McKinney walks through the process and the pricing.
Gate Motor & Opener in McKinney
Motors fail in patterns. In McKinney, the most common calls are for hydraulic swing operators that lost pressure, slide-gate chains that stretched, and control boards that shorted during a freeze-thaw cycle. We service nine major automation brands, so the fix is usually a repair to the existing motor rather than a full replacement. Gate Motor & Opener in McKinney lists the brands and the repair approach.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in McKinney
Gate access control in McKinney means the electronics that decide who gets through: keypads, remotes, phone entry, card readers, and video intercoms. Because so many McKinney homes sit inside HOA-governed communities, access control work here often carries a second layer: the hardware has to integrate with an existing subdivision system, or it has to be doctored to match a developer spec that is no longer manufactured. We handle both, and we document every wiring change so the next technician doesn’t have to guess. That documentation habit comes from Adrian Vance’s years on commercial access-control sites, and it’s the entire point of our Gate Access Control service.
Keypad Entry
Signs you need it
The keypad accepts some codes but not others, or the buttons work intermittently after rain.
What it costs in McKinney
Keypad replacement typically runs $150 to $350 depending on brand and whether the wiring to the operator can be reused.
How we do it
We test power at the keypad, pull the existing code list if the board still responds, install the new keypad, reprogram codes, and photograph the finished wiring.
Remote Control
Signs you need it
One remote works and another doesn’t, or the gate only opens when the remote is pressed from three feet away.
What it costs in McKinney
Remote programming and replacement typically runs $75 to $225 depending on brand and whether the receiver needs replacing.
How we do it
We match the remote to the receiver frequency, verify the operator’s learn mode, program all working remotes, and confirm range before we leave.
What Gate Access Control Costs in McKinney
| Item | Typical range in McKinney |
|---|---|
| Keypad replacement | $150 - $350 |
| Remote programming and replacement | $75 - $225 |
| Phone entry integration | $350 - $850 |
Can you integrate an access system into an existing HOA gate?
Yes. We pull the existing wiring schematic, check which brand of controller the HOA uses, and match new hardware to that protocol. The HOA architectural review may need the spec sheet before approval.
How fast can you get to a McKinney access control failure?
Same day in most cases. Access control failures leave gates stuck or unsecured, so we prioritize them. A live person answers at (469) 273-6254 any hour.
Gate Parts & Welding in McKinney
Gate parts and welding in McKinney is the work that keeps an older gate alive instead of replacing it. The heavy clay soil under Collin County heaves posts out of alignment, and the ornamental ironwork common to McKinney’s master-planned communities corrodes at the welds and hinge points. Matching the original picket profile and powder-coat color is usually mandatory, because the HOA will check. Our Gate Parts & Welding service covers repair and custom fabrication for exactly these situations.
Hinge Replacement
Signs you need it
The gate sags visibly, scrapes the ground, or the hinge pin has worn an oval hole in the barrel.
What it costs in McKinney
Hinge replacement typically runs $180 to $400 per hinge depending on gate weight and whether welding is required.
How we do it
We support the gate, cut or unbolt the old hinge, weld or bolt the replacement in place, and verify the gate swings level before we photograph the finished work.
Rail Repair
Signs you need it
The top rail is bowed, cracked at a weld, or the pickets have pulled loose from the bottom rail.
What it costs in McKinney
Rail repair typically runs $150 to $500 depending on rail length, material, and whether the damage is structural or cosmetic.
How we do it
We cut out the damaged section, weld or sleeve in a matching-profile replacement, grind the joint smooth, and match the powder coat to the existing finish.
What Gate Parts & Welding Costs in McKinney
| Item | Typical range in McKinney |
|---|---|
| Hinge replacement | $180 - $400 per hinge |
| Rail repair | $150 - $500 |
| Custom welding (per hour) | $85 - $145 |
Can you match a powder-coat color from a 2008 HOA spec?
Yes. We photograph the existing finish, verify the RAL or manufacturer code when a record exists, and have the replacement section coated to match before installation.
Is it cheaper to weld a cracked gate or replace the panel?
Usually welding is cheaper, especially when the panel itself is intact and the damage is at a hinge or stress point. Call (469) 273-6254 and we’ll give you a written price for both options.
Brands We Service in McKinney
We service Linear, Viking, Ghost Controls, and DoorKing operators, along with most other major automation brands, without steering homeowners toward a replacement motor when a repair makes more sense. Common circuit boards, remote receivers, and safety-edge parts are stocked for fast turnaround across McKinney. See our brands for the full list.
Pricing for Gate Repair in McKinney, TX
| Service | Typical range in McKinney |
|---|---|
| Keypad replacement | $150 - $350 |
| Remote programming and replacement | $75 - $225 |
| Phone entry integration | $350 - $850 |
| Hinge replacement | $180 - $400 per hinge |
| Rail repair | $150 - $500 |
| Custom welding | $85 - $145 per hour |
| Post replacement | $450 - $1,200 |
| Gate roller replacement | $120 - $300 per roller |
Prices in McKinney push upward when HOA matching forces custom fabrication instead of an off-the-shelf part, or when expansive clay has moved a post far enough that the post has to be reset before any other work can hold. Every price on this page is a range, not a bid. The number we hand you before any work starts is a written flat price, and it doesn’t change unless you add scope.
Neighborhoods We Serve in McKinney
We work across McKinney and the surrounding Collin County suburbs, with same-day availability in most of the city.
- Stonebridge Ranch
- Craig Ranch
- Trinity Falls
- Eldorado Heights
- Westridge
Most McKinney calls are answered the same day, and same-day emergency dispatch is available for gates stuck open, stuck closed, or off their tracks.
Service Area - Cities Near McKinney
We also serve neighboring cities throughout the metro. For gate work in Allen, TX, Plano, TX, Wylie, TX, or Frisco, TX, same scheduling and written-pricing policies apply, with dispatch coordinated from our Dallas-Fort Worth office.
Serving McKinney, TX - Our Local Coverage Area
We’re based in the McKinney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in McKinney
Most McKinney HOAs require architectural review only when the repair changes the appearance of the gate: new panels, different picket spacing, a different finish, or a new post. Like-for-like repair of existing hardware usually doesn’t need approval. We photograph the existing condition and can document the like-for-like match for the architectural committee if asked.
Same day in most neighborhoods including Stonebridge Ranch, Craig Ranch, and Trinity Falls. A live person answers at (469) 273-6254 any hour, and we’ll give you a real arrival window, not a four-hour range that gets rescheduled twice.
It’s real, and it’s measurable. Expansive clay under Collin County can move a gate post half an inch or more between wet and dry seasons, which is enough to bind a latch or rack a slide gate out of its track. We check plumb on every call because it’s the single most common root cause in McKinney.
If your gate is stuck, sagging, or ignoring its keypad, call (469) 273-6254 for a free estimate. The price is written and in your hand before any work starts, and you get a photo record of everything we found and fixed. That’s how we work on every gate in McKinney.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What McKinney Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.